[Dashboard]: Update Page

[Dashboard]: Update Page

Update Page



This page is accessible from the upper toolbar, button 'Software update' :


The 'Check for update now' button searches for any available update, from the Dashboard software or the 3dRudder firmware.


Dashboard update

The number of available Dashboard update(s) is shown in the text below :

Infoupdate 1

If no update is available, this text is :

Infoupdate 2

To update, click on button 'Update Dashboard'.


Firmware update

For updating, click on button 'Update 3dRudder' :

Buttonupdate 3 Drudder

WARNING : During the firmware update, do not unplug the 3dRudder cable; doing so may damage the device's firmware.

When the update is complete, you will see the following dialog.


3dRudder Recommends

    • Related Articles

    • [Dashboard]: Settings Page

      Settings Page Introduction The following page allow you to set few parameters of the Dashboard. Features This page features : the option to automatically search for the last updates, the option to disable the windows notification at startup, a ...
    • [Dashboard]: Unleash HTC / WMR Page / Dashboard in VR

       Unleash HTC / WMR Page / Dashboard in VR WARNING : This mode isn’t compatible with STEAMVR BETA. Please use the standard version instead.  https://support.steampowered.com/kb_article.php?ref=7021-EIAH-8669 Introduction Before using VR Unleashed, ...
    • [Dashboard]: User Manual

      Requirements SteamVR WARNING : The VR Unleashed mode is not compatible with STEAMVR BETA , please use the Standard version. (https://support.steampowered.com/kb_article.php?ref=7021-EIAH-8669) Firmware This version of the Dashboard works with ...
    • [Dashboard]: About Page

      About Page Presentation To access the about page, click on the 3dRudder logo.  Features This page features: a 'Visit 3drudder.com' button or the 3dRudder logo, to access the 3dRudder website, a 'Visit 3drudderbusiness.com' button to access the ...
    • [Dashboard]: Joystick Page

      Joystick Page Introduction From this page the user can select if the device will be used as a standard joystick or a HOTAS (Hand on Throttle And Stick). To do this, select the Joystick or HOTAS option, and press the 'Joystick/HOTAS mode activated' ...