Enable the 3dRudder to move the HMD (Head mounted Display) by clicking the appropriate box,
Adjust the movement speed ratio for each axis,
If desired, activate Smooth Mode.
The smoothing is a low-pass filter, taking as input N successive values of each axis, and giving as output the average of this values.
Calibration on 3dRudder startup: if this option is activated, the software will record the HMD position when the 3dRudder is started (feet on device).
This position will be used as the reference (i.e. initial) HMD position,
Set a vertical offset applied to the HMD and controllers; this allows for example to use the HMD while seated, but getting the same HMD altitude as using it in standing position.
Examples : HTC VIVE : The Lab
STEAM VR : Controller
Presentation
Enable the 3dRudder to trigger controller actions,
Associate each 3dRudder axis to a specific controller action.
Priority to trackpad: tick to yield priority to trackpad in case of double use. Eg. Navigating the pipboy in Fallout 4 VR.
Touch only: tick to patch touch controls only, leave blank to patch press + touch controls
For Valve Index you can choose the type of mapping (Trackpad or Joystick), by default All (Trackpad and Joystick)
You can modify "Height Offset" in your game. Thanks to this feature you can simulate the same height you would be if you were standing
Activate VR Unleashed mode,
Activate Calibration,
Change “Height Offset”,
Apply Parameters
Examples : Fallout 4 / DOOM VRF
Actions
‘Save Settings’: save parameters values as current values; when the Dashboard is started, it uses the current values,
'Save new settings' : saves current values in a specified configuration file ,
'Load settings' : load a configuration file,
'Activate VR Unleashed mode' : activate the VR unleashed mode,
'Reset to default settings' : reset VR unleashed parameters to their factory values.
Warning : you must apply the button "Activate VR Unleashed mode", after loading new settings
Unleash Oculus / Pimax Page Introduction After the Oculus platform has been installed and the Oculus Rift has been calibrated you must activate the VR Unleashed for every launched game. When you exit a game when VR Unleashed is activated, it will be ...
Requirements SteamVR WARNING : The VR Unleashed mode is not compatible with STEAMVR BETA , please use the Standard version. (https://support.steampowered.com/kb_article.php?ref=7021-EIAH-8669) Firmware This version of the Dashboard works with ...
About Page Presentation To access the about page, click on the 3dRudder logo. Features This page features: a 'Visit 3drudder.com' button or the 3dRudder logo, to access the 3dRudder website, a 'Visit 3drudderbusiness.com' button to access the ...
Game Page Introduction This page includes several ready to use configurations for both VR and flat games. Configuration types available: Monitor, for monitor games VR, for VR games. Configuration files are available for the following hardware: HTC ...
Troubleshooting When you use the Unleash VR mode of the 3dRudder Dashboard, the dashboard must displayed in VR. If it's not the case, please check That your graphic card driver is up to date Check that your headset is plugged to the same graphic card ...